Cort Jim Triggs TRG2A
Jim Triggs is one of the most respected arch top builders out there. Cort commissioned him to design and engineer this guitar for them to offer an affordable thin line guitar. Body is 1 7/8" deep, 16" wide, maple with a spruce top. Very versatile, it will do the Rockabilly thing, the Jazz thing, or drive it hard for some burnin' blues.
I purchased this guitar from the nice folks (Leslie) at the Instrumental Music Center, here in Tucson, Arizona.
Jim Triggs designed model
Scale : 24 3/4"
Neck Joint : Set-in
Body : Maple Top Maple Back & sides Soft maple center woodblock
Neck : Hard Maple - side markers
Fretboard : Rosewood
Neck depth:
1F:12F=21.5mm:23mm
Frets : large style (2.7mm * 1.1mm)
Number of.Frets: 22
Fretboard radius : 12"
Pickups :
Neck- Mightymite Vintage alnico Humbucker
Bridge- Mightymite Vintage alnico Humbucker
Controls : 2 volume -2 tone-3 way toggle
Tuning Machines: Diecast Gold Tuning Knobs : Pearl type with Gold accents
Bridge : Tune-o-matic with Bigsby licensed Vibrato tailpiece
Colors: Black, Transparent Orange, Three color burst (Shown -2003 NAMM Anniversary model only)
Scale : 24 3/4"
Neck Joint : Set-in
Body : Maple Top Maple Back & sides Soft maple center woodblock
Neck : Hard Maple - side markers
Fretboard : Rosewood
Neck depth:
1F:12F=21.5mm:23mm
Frets : large style (2.7mm * 1.1mm)
Number of.Frets: 22
Fretboard radius : 12"
Pickups :
Neck- Mightymite Vintage alnico Humbucker
Bridge- Mightymite Vintage alnico Humbucker
Controls : 2 volume -2 tone-3 way toggle
Tuning Machines: Diecast Gold Tuning Knobs : Pearl type with Gold accents
Bridge : Tune-o-matic with Bigsby licensed Vibrato tailpiece
Colors: Black, Transparent Orange, Three color burst (Shown -2003 NAMM Anniversary model only)